Tools and Accessories

H999 Clear is a high-performance, double-coated acrylic foam tape designed for permanent bonding in interior and exterior applications. Its viscoelastic acrylic foam core combines flexibility with long-term strength, allowing the tape to conform to microscopic surface irregularities, distribute stress and accommodate movement caused by vibration or thermal expansion. The clear construction provides a discreet finish, while its strong acrylic adhesive creates a secure bond across a wide range of substrates. H999 Clear is particularly suitable for bonding ACM and Dibond panels to channelling, as well as mounting signs, nameplates, emblems and metal components. With excellent resistance to UV, moisture, solvents and ageing, it provides reliable performance in demanding signage, display and fabrication applications.

H999 White is a high-performance, double-coated acrylic foam tape designed for permanent bonding in interior and exterior applications. Its viscoelastic acrylic foam core conforms to minor surface irregularities, helping to create a strong and consistent bond. It also absorbs dynamic loads, accommodates thermal expansion and distributes stress across the bonded area. The white 1.1mm offers superior adhesive strength and dynamic shear for demanding applications. Originally developed for window and door assembly, it is particularly suitable for bonding plastics; it can be used for mounting signs, panels, emblems, nameplates, electronic displays and other fabricated components. H999 White can replace conventional fastening methods such as riveting, welding and liquid adhesives in suitable applications, helping to create a clean finish without visible mechanical fixings.

Mactac Glove is a white cotton glove designed to be used during the application of self-adhesive materials. A seamless design allows the Mactac Glove to slide easily over the material surface, enabling easier application.

GloveMaxx Not only protect the film surface, but also reduce friction. Compared to conventional wrapping gloves, they offer four times the gliding properties. Their special fabric creates a unique "wet feeling" on the fingers: they glide over the film surface as effortlessly as if it had been treated with a liquid. In addition, GloveMaxx ProWrap are significantly more wear-resistant than cotton gloves and can withstand even minor cuts if the cutter should slip.

This unique car wrapping tool is equipped with two different tool ends: On one side, it features a circular shape that makes it easier to apply vinyl wraps to deep and hard-to-reach places. The special radius means that you always apply this mini squeegee at the correct 30-degree angle. This ensures wrinkle-free application of car wrapping films, even across concave surfaces. On the other side of the WrapStick Betty is a thin tapered blunt tip. It is ideal for perfectly working vinyl films into beads and other narrow recesses.

ProWrap Betty S40 is the new car wrapping squeegee from Yellotools. A collaboration with one of the best car wrap trainers and advertising technicians of our time - Robin Boes - led to the development of the ultimate "30-degree squeegee" for all car wrap and foil applications!

This unique car wrapping tool is equipped with two different tool tips: On one side, a flat spade shape that makes it easy to apply and cut the self-adhesive film in deep and hard-to-reach places. On the other side of the WrapStick Carson is a narrow tapered tip. It is ideal for working car films into beads and other narrow recesses.

Avery Dennison Application Gel is a transparent gel designed to support the application of paint protection film. The gel facilitates the ease of application, keeping the substrate well moisturised and providing the right tack and positioning of the film during installation. The Avery Dennison Application Gel residue can be easily cleaned after application, even when fully dried.

The TonnyMag Basic is of course made of our proven, certified plastics - without dangerous plasticizers and carcinogenic ingredients!

GeckoPatches are available in four variants: sizes S, M and L are particularly suitable for flat surfaces, and the GeckoPatch Flexi is also usable on curved surfaces and even around corners! The self-adhesive pads can be removed again without leaving any residue and serve not only as a mounting aid, but also to "park" tools such as our WrapSticks or the TonnyMag Basic magnetic squeegee within reach!

Mactac TagAway is a fluid designed to remove grafitti and spray-paint effectively from applied self-adhesive materials. Available in 1-litre bottles.

The WrapSlipCut MagicMaster is consequently an extremely slidable Teflon squeegee with parallel slots through which the knife is guided with exact spacing during cutting operations. This way, a clean film cut can be made on vehicle edges and windows in no time at all.

A collection of the most popular mini squeegee tools by Yellotools, amassed over many years of experience and now combined in one handy set. There are 7 different squeegee pens with a total of 13 different tool ends in 5 different degrees of hardness.

Perfect tool to remove the backing paper on vinyl, can be used as a standard cutter as well.

GeckoPatches are available in four variants: sizes S, M and L are particularly suitable for flat surfaces, and the GeckoPatch Flexi is also usable on curved surfaces and even around corners! The self-adhesive pads can be removed again without leaving any residue and serve not only as a mounting aid, but also to "park" tools such as our WrapSticks or the TonnyMag Basic magnetic squeegee within reach!

PM04 is water based primer which is exclusively used for LX Hausys Interior Film, BENIF. It can enhance application stability of BENIF when used for various substrates such as wood, board, steel plate and painted plate.

Mactac Squeegee Europe is a red plastic soft squeegee, suitable for the application of self-adhesive materials on flat and curved surfaces.

The sasser cut pro set is a roller-guided splitting knife for professional Car Wrappers. Roller guided splitting knife "SasserCut Pro" has a standard immersion depth of 5.3 mm

LeanRuler Brackets: Depending on the variant, the cutting ruler can be stored either horizontally on the wall or beneath the work table - ready to hand and space-saving. The brackets are simply screwed to the tabletop from below or directly to the wall.

Mactac Squeegee Strips are soft, self-adhering, protective strips designed to be applied on the edges of Mactac Squeegees. The strips are easy to apply and enable higher quality applications by protecting the graphic material from scratches and facilitating sliding of the squeegee.