Cladding tools

TH-9 cladding strip heater is a 3100mm Hygienic Wall cladding Line Bender primarily used in the building trade but can also be used at home or in an industrial workshop setting.

Large skeleton gun used with 600ml foil sausage cladding adhesive (will take 900ml and 1 Litre single component cartridges).

White coving strip used in conjunction with PVC cladding sheet. Dimensions 4000mm x 65mm

PVC 3 way corner that provides an aesthetically pleasing curved finish to corners during application of cladding sheets to vertical and horizontal walls.

HB40 polymer adhesive is a one part grab solvent free adhesive, offering a high degree of adhesion across many uses in the building industry, vehicle building, marine, caravan and motorhome.

Two part pvc jointer used to cover the join where 2 cladding sheets meet. Flat base profile with raised centre ridge and curved outer cover that push fits to fix in situ.

Two part pvc jointer used to cover the join where 2 cladding sheets meet. Flat base profile with raised centre ridge and curved outer cover that push fits to fix in situ.

Two part pvc jointer used to cover the join where 2 cladding sheets meet. Flat base profile with raised centre ridge and curved outer cover that push fits to fix in situ.

White PVC angle 28mm L shaped and used with PVC cladding sheet to provide a clean finish on external corners.

PVC extrusion has a tight seal at the mouth of the joint. The joint trim comes in two sizes 2440mm and 3050mm.

Two part pvc dark grey jointer used to cover the join where 2 cladding sheets meet. Flat base profile with raised centre ridge and curved outer cover that push fits to fix in situ.

White PVC angle 50mm L shaped and used with PVC cladding sheet to provide a clean finish on external corners.

PVC co-extrusion which can be used at the top and the bottom of hygienic cladding sheets.

Used in conjunction with a weld/heat gun and applied from top to bottom between two sheet. Supplied in 100 meter rolls.